Weed Brush
Contact us for current availability.
The MWB 90-45 is a 2-in-1 combined weed brush and edging blade attachment suitable for all Multihog tractors. It mechanically removes weeds and trims grass verges using no toxic substances.
900 mm (35 in) diameter weed brush paired with a 450 mm (18 in) diameter edging blade in a single attachment
Fully retractable edging blade so the weed brush can operate alone when required
Low-rev brush operation prevents damage to brushed surfaces
Pressure-regulated valves stop the blade from moving into unwanted positions
Hydraulic height and width adjustment of the edging blade; brush is adjustable in all directions
Fits all Multihog tractors with joystick control of every rotation and swivel function from inside the cabin
Very low operating noise levels suitable for urban and residential work
Municipalities, landscape contractors, and facilities management teams that must control kerb-line weeds and trim grass verges without herbicides. A strong fit for councils with chemical-free ordinances or sensitive sites near waterways.
Kerb and gutter weed removal in town centres
Path, driveway, and car-park joint cleaning
Grass-verge edging along roads and greenways
Playground, school, and park maintenance where herbicides are prohibited
Cemetery and memorial grounds upkeep
Combines a 90 cm weed brush with a 45 cm retractable edging blade in one attachment, so operators cover two routine maintenance jobs without swapping implements. The extra-large brush runs at low revs to preserve the surface being cleaned, and pressure-regulated valves prevent the blade drifting out of position. Fully hydraulic adjustment in all directions plus joystick control keeps the operator in the cabin, and low noise output suits night or residential schedules. Fits every Multihog tractor, so it rolls into existing fleets.
Replaces handheld string trimmers, pedestrian weed brushes, and chemical herbicide programmes for councils and contractors seeking a mechanical, one-pass solution.
For systemic weed kill rather than surface brushing, specify the Multihog Thermal Weed Control attachment so heat can treat roots through repeated passes.
Weed Brush For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the Weed Brush best suited for?
Municipalities, landscape contractors, and facilities management teams that must control kerb-line weeds and trim grass verges without herbicides. A strong fit for councils with chemical-free ordinances or sensitive sites near waterways.
What are the main applications for the Weed Brush?
The Weed Brush is ideal for: Kerb and gutter weed removal in town centres; Path, driveway, and car-park joint cleaning; Grass-verge edging along roads and greenways; Playground, school, and park maintenance where herbicides are prohibited; Cemetery and memorial grounds upkeep.
What sets the Weed Brush apart from other quick-change attachments?
Combines a 90 cm weed brush with a 45 cm retractable edging blade in one attachment, so operators cover two routine maintenance jobs without swapping implements. The extra-large brush runs at low revs to preserve the surface being cleaned, and pressure-regulated valves prevent the blade drifting out of position. Fully hydraulic adjustment in all directions plus joystick control keeps the operator in the cabin, and low noise output suits night or residential schedules. Fits every Multihog tractor, so it rolls into existing fleets.
When should I consider a different model instead of the Weed Brush?
For systemic weed kill rather than surface brushing, specify the Multihog Thermal Weed Control attachment so heat can treat roots through repeated passes.
What is the typical upgrade path from the Weed Brush?
Replaces handheld string trimmers, pedestrian weed brushes, and chemical herbicide programmes for councils and contractors seeking a mechanical, one-pass solution.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the Weed Brush?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.