Thermal Weed Control
Contact us for current availability.
Thermal weed control attachments (MTWC E900 and sensor-operated MTWC H900) use 100% hot water, no chemicals or pesticides, to treat weeds on pavements and public spaces. Suited to contractors, municipalities, and facilities teams subject to herbicide restrictions.
102 °C (215 °F) hot-water treatment kills weeds without toxic chemicals, no species is resistant
900 L (237 gal) high-capacity rear tank on MTWC E900 reduces shift refills
MTWC H900 sensor model scales from 500–1,100 L (132–290 gal) tank and treats up to 400 hectares per season
Front-mounted treatment unit is up to 140 cm (55 in) wide with a 25 cm (10 in) side-shift function on E900; 120–160 cm (47–63 in) wide on H900
20 m (22 yd) hand lance on spring reel (E900) and 12 m (13 yd) reel (H900) for manual treatment of hard-to-reach areas
Automatic temperature control and heat exchanger cut energy use while holding a stable water temperature
Operating speed 0.5–5.0 km/h (0.3–3.0 mph) on the H900 sensor model
Only 3 treatments per season needed thanks to systemic effect on the plant's roots
See the Thermal Weed Control at work
Landscape contractors, municipalities, and facilities management companies that must maintain parks, town squares, cemeteries, and stadium pitches under chemical-free mandates. Particularly well suited where treatment near open water or in bad weather is required.
Town-centre pavements, kerbs, and pedestrian zones
Parks, green spaces, and public squares
Cemeteries and memorial grounds
Stadium pitch surrounds and sports facilities
Sites adjacent to open water where chemical sprays are prohibited
Uses 102 °C water rather than herbicide, so it can be applied in bad weather, near open water, and on sites with chemical bans that shut out traditional sprayers. The H900 sensor model covers 400 hectares per season and needs only 3 treatments per year thanks to a systemic root effect, while the E900 carries a 900 L tank to cut refill stops. An integrated heat exchanger reduces the energy required to hold treatment temperature, and a 20 m hand-lance reel reaches hard-to-get corners. No species of weed is resistant.
Replaces glyphosate and other chemical herbicide programmes, as well as flame-weeder trolleys, for councils and contractors transitioning to non-chemical vegetation control.
For quick surface-only removal of moss and grass at joint lines, the mechanical Multihog Weed Brush may be a faster and lower-water-use option.
Thermal Weed Control For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the Thermal Weed Control best suited for?
Landscape contractors, municipalities, and facilities management companies that must maintain parks, town squares, cemeteries, and stadium pitches under chemical-free mandates. Particularly well suited where treatment near open water or in bad weather is required.
What are the main applications for the Thermal Weed Control?
The Thermal Weed Control is ideal for: Town-centre pavements, kerbs, and pedestrian zones; Parks, green spaces, and public squares; Cemeteries and memorial grounds; Stadium pitch surrounds and sports facilities; Sites adjacent to open water where chemical sprays are prohibited.
What sets the Thermal Weed Control apart from other quick-change attachments?
Uses 102 °C water rather than herbicide, so it can be applied in bad weather, near open water, and on sites with chemical bans that shut out traditional sprayers. The H900 sensor model covers 400 hectares per season and needs only 3 treatments per year thanks to a systemic root effect, while the E900 carries a 900 L tank to cut refill stops. An integrated heat exchanger reduces the energy required to hold treatment temperature, and a 20 m hand-lance reel reaches hard-to-get corners. No species of weed is resistant.
When should I consider a different model instead of the Thermal Weed Control?
For quick surface-only removal of moss and grass at joint lines, the mechanical Multihog Weed Brush may be a faster and lower-water-use option.
What is the typical upgrade path from the Thermal Weed Control?
Replaces glyphosate and other chemical herbicide programmes, as well as flame-weeder trolleys, for councils and contractors transitioning to non-chemical vegetation control.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the Thermal Weed Control?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.