Surface Cleaner
Contact us for current availability.
The Scrubber Deck SD 1400 is a wet-cleaning attachment that works with the Multihog CV 350 sweeper chassis for deep cleaning of large flat surfaces. All soiled water is collected via the Multihog's wide suction head, leaving the surface dry-ready.
1,400 mm (55 in) working width with 3 overlapping brushes for corner and column cleaning
Cleaning throughput of 700–5,500 m² (837–6,578 yd²) per hour depending on soiling
200 L (53 gal) fresh water tank on the Multihog plus 35 L (9 gal) detergent tank on the deck
Automatic detergent dosing from the integrated tank
Brush plates in triangular layout with height compensation and adjustable surface pressure
Operational speed of 0.5–4 km/h (0.3–2.5 mph) matched to soiling level
Works with the Multihog CV 350 sweeper chassis, suction function on the tractor is required
See the Surface Cleaner at work
Facilities teams, shopping-centre operators, and municipal crews that already run a Multihog CV 350 sweeper and need to deep-scrub squares, plazas, multi-storey car parks, and large indoor surfaces. Best where a dry floor is needed immediately after cleaning.
Public squares and pedestrian plazas
Multi-storey and surface car parks
Paths, promenades, and large event surfaces
Shopping-centre forecourts
Streets with dried-on grime needing scrubbing rather than sweeping
Uses a triangular 3-brush layout with integrated height compensation to clean tight into corners and around columns, a geometry most flat ride-on scrubbers can't match. Because soiled water is captured by the Multihog's own suction head, the surface is left dry-ready without a second pass. Automatic detergent dosing from the 35-litre on-deck tank removes operator guesswork, and the short front dimension keeps the machine manoeuvrable. Throughput scales from 700 up to 5,500 m²/hr depending on how soiled the surface is.
Replaces stand-alone ride-on scrubber-driers and manual scrubbing crews for facilities that want their Multihog CV 350 to handle both dry sweeping and wet scrubbing.
For routine bulk debris and leaf pickup without water, use the Multihog High Volume Sweeper or Front Sweeper instead.
Surface Cleaner For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the Surface Cleaner best suited for?
Facilities teams, shopping-centre operators, and municipal crews that already run a Multihog CV 350 sweeper and need to deep-scrub squares, plazas, multi-storey car parks, and large indoor surfaces. Best where a dry floor is needed immediately after cleaning.
What are the main applications for the Surface Cleaner?
The Surface Cleaner is ideal for: Public squares and pedestrian plazas; Multi-storey and surface car parks; Paths, promenades, and large event surfaces; Shopping-centre forecourts; Streets with dried-on grime needing scrubbing rather than sweeping.
What sets the Surface Cleaner apart from other quick-change attachments?
Uses a triangular 3-brush layout with integrated height compensation to clean tight into corners and around columns, a geometry most flat ride-on scrubbers can't match. Because soiled water is captured by the Multihog's own suction head, the surface is left dry-ready without a second pass. Automatic detergent dosing from the 35-litre on-deck tank removes operator guesswork, and the short front dimension keeps the machine manoeuvrable. Throughput scales from 700 up to 5,500 m²/hr depending on how soiled the surface is.
When should I consider a different model instead of the Surface Cleaner?
For routine bulk debris and leaf pickup without water, use the Multihog High Volume Sweeper or Front Sweeper instead.
What is the typical upgrade path from the Surface Cleaner?
Replaces stand-alone ride-on scrubber-driers and manual scrubbing crews for facilities that want their Multihog CV 350 to handle both dry sweeping and wet scrubbing.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the Surface Cleaner?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.