Stump Grinder
Contact us for current availability.
MSG 1000 front-mounted stump grinder for Multihog MH and MX tractors, designed for commercial, municipal, and forestry crews. Articulated Multihog chassis plus long cutting reach access hard-to-reach woodland stumps without damaging surrounding ground.
Cutting wheel diameter of 530 mm (21 in)
Retracted cutting arc of 940 mm (37 in) and extended cutting arc of 1,250 mm (49 in)
1,000 mm (39 in) above-ground reach and 600 mm (23 in) below-ground reach
Grinder features 16 long-lasting, heavy-duty cutting teeth
Front-mounted, suitable for the MH and MX Multihog ranges
Completely controlled from within the safe confines of the Multihog cabin, reducing accident risk
Multihog articulation allows access to hard-to-reach woodland areas
See the Stump Grinder at work
Municipal arborist crews, commercial tree-care firms, and forestry contractors removing stumps after storm damage, land clearance, or parkway tree replacement programs. Strong fit for teams that need cab-protected grinding on live job sites rather than exposed walk-behind units.
Post-felling stump grinding in municipal parks and streetscapes
Storm-damage cleanup after root-ball or trunk removal
Commercial land-clearance for construction prep
Forestry trail and access-road maintenance
Grinding below finished grade (600 mm / 23 in) for lawn or paving restoration
A 1,250 mm (49 in) extended cutting arc combined with 1,000 mm above-ground and 600 mm below-ground reach covers stumps that walk-behind grinders can't swing across in one setup. 16 heavy-duty teeth on a 530 mm cutting wheel chew through hardwood stumps while keeping teeth cost per job low. Full cabin control removes the chip-and-debris exposure risk of walk-behind units, and the Multihog's articulation reaches woodland stumps that towed grinders can't access.
Displaces walk-behind and towed stump grinders plus sub-contracted tree-service callouts for stump removal. Municipal and forestry crews handle the work in-house on equipment they already own.
Not the right tool when you need to move the resulting woodchip, debris, and stump shavings off site, pair it with the High Tip Bucket (MHTB 350) for 350 L capacity loading over skip walls.
Stump Grinder For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the Stump Grinder best suited for?
Municipal arborist crews, commercial tree-care firms, and forestry contractors removing stumps after storm damage, land clearance, or parkway tree replacement programs. Strong fit for teams that need cab-protected grinding on live job sites rather than exposed walk-behind units.
What are the main applications for the Stump Grinder?
The Stump Grinder is ideal for: Post-felling stump grinding in municipal parks and streetscapes; Storm-damage cleanup after root-ball or trunk removal; Commercial land-clearance for construction prep; Forestry trail and access-road maintenance; Grinding below finished grade (600 mm / 23 in) for lawn or paving restoration.
What sets the Stump Grinder apart from other quick-change attachments?
A 1,250 mm (49 in) extended cutting arc combined with 1,000 mm above-ground and 600 mm below-ground reach covers stumps that walk-behind grinders can't swing across in one setup. 16 heavy-duty teeth on a 530 mm cutting wheel chew through hardwood stumps while keeping teeth cost per job low. Full cabin control removes the chip-and-debris exposure risk of walk-behind units, and the Multihog's articulation reaches woodland stumps that towed grinders can't access.
When should I consider a different model instead of the Stump Grinder?
Not the right tool when you need to move the resulting woodchip, debris, and stump shavings off site, pair it with the High Tip Bucket (MHTB 350) for 350 L capacity loading over skip walls.
What is the typical upgrade path from the Stump Grinder?
Displaces walk-behind and towed stump grinders plus sub-contracted tree-service callouts for stump removal. Municipal and forestry crews handle the work in-house on equipment they already own.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the Stump Grinder?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.