Solar Panel Cleaner
Contact us for current availability.
The SC 450/650 is a mobile cleaning arm for photovoltaic and solar installations, available in wet, dry, and warm-water cleaning modes. Designed for solar-farm O&M teams who need high throughput without damaging modules.
Highly efficient output of up to 7,000 m² (8,372 yd²) per hour depending on module size
Solar cleaning brush available in sizes up to 6.5 m (21 ft), model dependent
180° swivel angle on the brush for efficient coverage across a solar park
Washtronic system with automatic level compensation for uneven terrain
Self-regulating, uniform brush pressure that is set once and remains constant throughout the process
Wet, dry, and warm-water cleaning modes, dry cleaning is also a cost-effective method without damaging panels
All raising, lowering, and swivelling functions controlled by a single joystick inside the cabin
Optional diagnostic kit identifies module defects and enables remote monitoring of cleaning operations
See the Solar Panel Cleaner at work
Solar-farm operators, utility-scale PV asset managers, and O&M contractors who must keep multi-megawatt installations at peak generation. Especially useful on sites where water is scarce (dry mode) or where terrain is uneven.
Utility-scale solar farms and PV arrays
Commercial rooftop ground-mount installations
Desert and arid-climate solar parks (dry cleaning)
Uneven terrain ground-mount sites (auto level compensation)
Defect and quality monitoring runs using the optional diagnostic kit
Delivers up to 7,000 m² per hour of throughput with a brush that can extend to 6.5 m, making it one of the highest-capacity tractor-mounted solar cleaners in its class. The Washtronic system self-regulates brush pressure and levels automatically over uneven ground, eliminating operator-induced module damage. Three cleaning modes (wet, dry, warm water) let operators match method to climate and water availability. An optional diagnostic kit turns cleaning runs into quality-control inspections with remote monitoring.
Replaces manual mop-and-squeegee crews, trailer-mounted rotary brushes, and dedicated single-purpose solar cleaners for O&M teams that want their Multihog to cover seasonal cleaning alongside other site work.
For pavement, road, and sign cleaning rather than PV modules, choose the Multihog High Pressure Washer instead of this delicate-surface arm.
Solar Panel Cleaner For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the Solar Panel Cleaner best suited for?
Solar-farm operators, utility-scale PV asset managers, and O&M contractors who must keep multi-megawatt installations at peak generation. Especially useful on sites where water is scarce (dry mode) or where terrain is uneven.
What are the main applications for the Solar Panel Cleaner?
The Solar Panel Cleaner is ideal for: Utility-scale solar farms and PV arrays; Commercial rooftop ground-mount installations; Desert and arid-climate solar parks (dry cleaning); Uneven terrain ground-mount sites (auto level compensation); Defect and quality monitoring runs using the optional diagnostic kit.
What sets the Solar Panel Cleaner apart from other quick-change attachments?
Delivers up to 7,000 m² per hour of throughput with a brush that can extend to 6.5 m, making it one of the highest-capacity tractor-mounted solar cleaners in its class. The Washtronic system self-regulates brush pressure and levels automatically over uneven ground, eliminating operator-induced module damage. Three cleaning modes (wet, dry, warm water) let operators match method to climate and water availability. An optional diagnostic kit turns cleaning runs into quality-control inspections with remote monitoring.
When should I consider a different model instead of the Solar Panel Cleaner?
For pavement, road, and sign cleaning rather than PV modules, choose the Multihog High Pressure Washer instead of this delicate-surface arm.
What is the typical upgrade path from the Solar Panel Cleaner?
Replaces manual mop-and-squeegee crews, trailer-mounted rotary brushes, and dedicated single-purpose solar cleaners for O&M teams that want their Multihog to cover seasonal cleaning alongside other site work.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the Solar Panel Cleaner?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.