Snow Brush
Contact us for current availability. Order before fall for winter readiness.
Front-mounted Snow Brush (MRSB 2300) built on a heavy-duty PPN spiral-segment brush with roller levelling and a rubber spray protector. Designed for Multihog MH and MX ranges and controlled fully from the cab.
2,300 mm (90 in) working width with hydraulic lift, tilt, and angle
Large-diameter main snow brush for aggressive sweeping action
Heavy-duty PPN spiral-segment brush, roller-levelled with rubber spray protector
30° swivel to each side, joystick-controlled from inside the cab
All sweeper functions hydraulically controlled from the Multihog cab, operator stays warm and dry
Front-mounted compatibility with MH and MX tractor ranges
See the Snow Brush at work
Municipalities, airports, maintenance contractors, and facilities management companies running Multihog tractors that need a clean surface after light snow, slush, or thaw. Best for sites where a plough would over-scrape or leave a residual film that refreezes.
Brushing airport taxiways and pedestrian walkways after light snow
Clearing city sidewalks, plazas, and pedestrian crossings
Sweeping transit platforms and station forecourts
Removing residual snow film from school and campus paths
Finishing a ploughed surface to bare pavement before de-icing
The roller-levelled PPN spiral-segment main brush is built for snow, not for summer dirt, it moves aggressively through slush and packed dust without flexing out of contact. The 30° joystick-controlled swivel each way lets the operator cast snow curbside without repositioning, and the rubber spray protector keeps slush off signage and parked vehicles. 2,300 mm of working width clears a typical shared-use path in one pass.
Replaces the hand-shovel and backpack-blower crews that finish a ploughed walkway to bare pavement.
Not the right tool for heavy accumulation, run the Snow Plough or Combi Snow Plough & Brush for the initial push before bringing in the brush.
Snow Brush For Sale
2026 Multihog CV350 Compact Vacuum Sweeper
Demo unit with 22 miles and 20 chassis engine hours • 75 HP Hatz engine, Stage V / Tier 4 Final, HVO-ready
2026 Multihog CV350 Compact Vacuum Sweeper
75 HP Hatz engine, Stage V / Tier 4 Final emissions, HVO-ready • 2 cubic yard (1.5 m³) aluminum-alloy hopper
2026 Multihog CV350 Compact Vacuum Sweeper
75 HP Hatz engine, Stage V / Tier 4 Final, HVO-ready • 2 yd³ (1.5 m³) aluminum-alloy hopper
2026 Multihog CX75 Multipurpose Tractor
75 HP, 2.2 L Deutz engine meeting Stage V (EU) and Tier 4 Final (US/CA), no AdBlue required • 26.4 gpm (100 L/min) hydraulic flow at up to 3,190 psi (220 bar) with load-sensing PTO front and rear
2026 Multihog CV350 Compact Vacuum Sweeper
Demo unit with 7 miles and 5 chassis engine hours • 2 cubic yard (1.5 m3) aluminum-alloy hopper
2024 Multihog CX75 Multipurpose Tractor
Demo unit with 679 miles and 126 chassis engine hours • 75 HP, 2.2 L Deutz engine meeting Stage V (EU) and Tier 4 Final (US/CA) standards, no AdBlue required
2023 Multihog CX75 Multipurpose Tractor
Demo unit with 106 miles and 87 chassis engine hours • 75 HP, 2.2 L Deutz engine meeting Stage V (EU) and Tier 4 Final (US/CA), no AdBlue required
2018 Multihog CX75 Kit, Used, Includes CX75 and 4 Attachments
75 HP, 2.2 L Deutz engine meeting Stage V (EU) and Tier 4 Final (US/CA) emissions standards with no AdBlue required • 26.4 gpm (100 L/min) hydraulic flow at up to 3,190 psi (220 bar) with load-sensing PTO front and rear
Frequently Asked Questions
Who is the Snow Brush best suited for?
Municipalities, airports, maintenance contractors, and facilities management companies running Multihog tractors that need a clean surface after light snow, slush, or thaw. Best for sites where a plough would over-scrape or leave a residual film that refreezes.
What are the main applications for the Snow Brush?
The Snow Brush is ideal for: Brushing airport taxiways and pedestrian walkways after light snow; Clearing city sidewalks, plazas, and pedestrian crossings; Sweeping transit platforms and station forecourts; Removing residual snow film from school and campus paths; Finishing a ploughed surface to bare pavement before de-icing.
What sets the Snow Brush apart from other quick-change attachments?
The roller-levelled PPN spiral-segment main brush is built for snow, not for summer dirt, it moves aggressively through slush and packed dust without flexing out of contact. The 30° joystick-controlled swivel each way lets the operator cast snow curbside without repositioning, and the rubber spray protector keeps slush off signage and parked vehicles. 2,300 mm of working width clears a typical shared-use path in one pass.
When should I consider a different model instead of the Snow Brush?
Not the right tool for heavy accumulation, run the Snow Plough or Combi Snow Plough & Brush for the initial push before bringing in the brush.
What is the typical upgrade path from the Snow Brush?
Replaces the hand-shovel and backpack-blower crews that finish a ploughed walkway to bare pavement.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the Snow Brush?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.