Snow Blower
Contact us for current availability. Order before fall for winter readiness.
Wide range of front-mounted snow blowers for Multihog MH and MX tractors, from the compact MSB W1500/2000 through the heavy-duty MSB KFS 650/750 and the professional MSB Z72/Z90 with Safety Clutch. Full hydraulic chute control from the cab.
Clearing widths from 1,300–2,700 mm (4.3–8.9 ft) across the MSB range
Precise 2-stage snow-throwing synchronisation on KFS models
Chute swivels 240° on W1500/2000, with hydraulic rotation and inclination on Z72/Z90
Patented Safety Clutch on MSB Z72/Z90 stops the blower head the instant it strikes a hard object
Automatic overload protection and easily accessible shear-pin coupling on KFS models
Open clearing system handles every snow type from slush to frozen pack
See the Snow Blower at work
Municipalities, airports, ski resorts, and mountain-road contractors running Multihog tractors that have to move snow off-site, load it onto trucks, or throw it over high banks. Best for operations already buried before the first plow pass.
Blowing drifted rural and mountain-pass roads back open
Loading cleared snow onto dump trucks and trailers via chute extensions
Clearing airport taxiway and apron edges of packed plow windrows
Keeping ski-resort access roads and lift parking open
Removing accumulated snow from city streets that cannot be stockpiled
Three different blower platforms cover light-duty through the hardest conditions: W1500/2000 for compact routes, KFS 650/750 with wear plate and automatic overload protection for heavy daily work, and Z72/Z90 with the patented Safety Clutch that stops the head on impact before damage occurs. Chute extensions that load directly into trucks mean you move snow off-site in one pass instead of double-handling stockpiles.
Replaces dedicated truck-loading setups where a wheel loader scoops stockpiled snow into dump trucks, collapsing two machines into one operation.
Not the right attachment for routine urban plowing where snow can be pushed curbside, the Snow Plough or Combi Snow Plough & Brush covers that at much lower cost.
Snow Blower For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the Snow Blower best suited for?
Municipalities, airports, ski resorts, and mountain-road contractors running Multihog tractors that have to move snow off-site, load it onto trucks, or throw it over high banks. Best for operations already buried before the first plow pass.
What are the main applications for the Snow Blower?
The Snow Blower is ideal for: Blowing drifted rural and mountain-pass roads back open; Loading cleared snow onto dump trucks and trailers via chute extensions; Clearing airport taxiway and apron edges of packed plow windrows; Keeping ski-resort access roads and lift parking open; Removing accumulated snow from city streets that cannot be stockpiled.
What sets the Snow Blower apart from other quick-change attachments?
Three different blower platforms cover light-duty through the hardest conditions: W1500/2000 for compact routes, KFS 650/750 with wear plate and automatic overload protection for heavy daily work, and Z72/Z90 with the patented Safety Clutch that stops the head on impact before damage occurs. Chute extensions that load directly into trucks mean you move snow off-site in one pass instead of double-handling stockpiles.
When should I consider a different model instead of the Snow Blower?
Not the right attachment for routine urban plowing where snow can be pushed curbside, the Snow Plough or Combi Snow Plough & Brush covers that at much lower cost.
What is the typical upgrade path from the Snow Blower?
Replaces dedicated truck-loading setups where a wheel loader scoops stockpiled snow into dump trucks, collapsing two machines into one operation.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the Snow Blower?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.