Salt Spreader
Contact us for current availability. Order before fall for winter readiness.
Rear-mounted Salt Spreader (MHGSS/MXGSS) for Multihog MH and MX tractor ranges, available in both dry material and wet salt configurations. Flat hopper design keeps operator sightlines open and the short spreading chute overhang preserves maneuverability.
Hopper capacity from 1–1.3 m³ (35–46 ft³) depending on model
Adjustable spread width and material spread rate to match the route
Both dry material and wet salt (pre-wetting) models available
Speed-sensing controllers with auto-stop technology halt spreading when the Multihog is stopped
High proportion of stainless steel parts for longevity and low servicing costs
Flat hopper design for optimum operator visibility and travel safety
Municipalities, DOT winter teams, and large facility managers on Multihog MH or MX platforms who spread rock salt across streets, bridges, and lots on set routes. Best for crews who already track application rates and want speed-sensed distribution that does not waste product at stops.
Treating municipal streets, bus routes, and emergency lanes
Salting commercial car parks and distribution yards after plowing
Running airport service roads and landside facility roads
Covering school, campus, and hospital entrances and drives
Pre-wet application on bridges and overpasses using the wet salt model
Speed-sensed auto-stop is the cost-saver, spreading halts the instant the Multihog stops at a light, so salt ends up on the road, not in a pile under the tractor. Variable spread width covers everything from a sidewalk-adjacent shoulder to a full two-lane pass, and adjustable rate control meets most spec tables. A high stainless content resists salt corrosion far better than painted steel hoppers, and the flat hopper profile keeps rear visibility open.
Replaces dedicated salt trucks and hopper-equipped pickups on routes a compact multi-purpose tractor can cover more economically.
Not the right match for sidewalk-only grit spreading, the Drop Sander is built for precise 1/3 yd³ sand and grit placement on pedestrian paths.
Salt Spreader For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the Salt Spreader best suited for?
Municipalities, DOT winter teams, and large facility managers on Multihog MH or MX platforms who spread rock salt across streets, bridges, and lots on set routes. Best for crews who already track application rates and want speed-sensed distribution that does not waste product at stops.
What are the main applications for the Salt Spreader?
The Salt Spreader is ideal for: Treating municipal streets, bus routes, and emergency lanes; Salting commercial car parks and distribution yards after plowing; Running airport service roads and landside facility roads; Covering school, campus, and hospital entrances and drives; Pre-wet application on bridges and overpasses using the wet salt model.
What sets the Salt Spreader apart from other quick-change attachments?
Speed-sensed auto-stop is the cost-saver, spreading halts the instant the Multihog stops at a light, so salt ends up on the road, not in a pile under the tractor. Variable spread width covers everything from a sidewalk-adjacent shoulder to a full two-lane pass, and adjustable rate control meets most spec tables. A high stainless content resists salt corrosion far better than painted steel hoppers, and the flat hopper profile keeps rear visibility open.
When should I consider a different model instead of the Salt Spreader?
Not the right match for sidewalk-only grit spreading, the Drop Sander is built for precise 1/3 yd³ sand and grit placement on pedestrian paths.
What is the typical upgrade path from the Salt Spreader?
Replaces dedicated salt trucks and hopper-equipped pickups on routes a compact multi-purpose tractor can cover more economically.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the Salt Spreader?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.