Runway Light Cleaner
Contact us for current availability.
The MRLC 200 was developed in-house by Multihog R&D exclusively for the MX tractor. It uses a soda, water, and air blast followed by a water rinse to clean in-pavement runway lights without damaging LEDs or aluminium housings.
Approximately 30-second cleaning cycle per light, with each fixture cleaned in a single pass
60 L soda tank plus 200 L water tank, one fill cleans thousands of lights per shift
Low-pressure 2–3 bar cleaning blast ensures no damage to LED lights
Non-corrosive soda compound safe for aluminium and steel light fixtures
Joystick-controlled from within the cabin so the operator stays warm and dry
Operates in any season and even in adverse weather conditions
LED work lights on the front of the Multihog for excellent night-time visibility
Optional rear-mounted camera and integrated design reduce health and safety risk on active airfields
See the Runway Light Cleaner at work
Airports, air force bases, and airfield maintenance contractors responsible for keeping in-pavement runway, taxiway, and approach lights at required photometric output. Fleets already running the Multihog MX tractor gain an immediate specialised use-case.
Commercial airport runway and taxiway light cleaning
Military airfield light maintenance
General aviation field lighting upkeep
Low-visibility weather periods where light intensity is critical
Night-shift airfield operations using the front LED work lights
Developed exclusively for the Multihog MX to tackle a job most street-cleaning attachments cannot, cleaning thousands of recessed airfield lights on a single 60/200 L fill, without damaging LEDs or their housings. The soda-water-air blast runs at only 2–3 bar, cleans each fixture in roughly 30 seconds, and improves light intensity to keep aircraft moving in low-visibility weather. Because cleaning is joystick-controlled from a heated cabin with optional rear camera, operators stay safe on active airfield surfaces in any season.
Replaces manual scrub crews and dedicated specialist runway-light washing trucks for airports that want to fold light cleaning into the same Multihog they already use for sweeping and snow clearance.
For general pavement or perimeter-road washing rather than recessed light fixtures, specify the Multihog High Pressure Washer instead.
Runway Light Cleaner For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the Runway Light Cleaner best suited for?
Airports, air force bases, and airfield maintenance contractors responsible for keeping in-pavement runway, taxiway, and approach lights at required photometric output. Fleets already running the Multihog MX tractor gain an immediate specialised use-case.
What are the main applications for the Runway Light Cleaner?
The Runway Light Cleaner is ideal for: Commercial airport runway and taxiway light cleaning; Military airfield light maintenance; General aviation field lighting upkeep; Low-visibility weather periods where light intensity is critical; Night-shift airfield operations using the front LED work lights.
What sets the Runway Light Cleaner apart from other quick-change attachments?
Developed exclusively for the Multihog MX to tackle a job most street-cleaning attachments cannot, cleaning thousands of recessed airfield lights on a single 60/200 L fill, without damaging LEDs or their housings. The soda-water-air blast runs at only 2–3 bar, cleans each fixture in roughly 30 seconds, and improves light intensity to keep aircraft moving in low-visibility weather. Because cleaning is joystick-controlled from a heated cabin with optional rear camera, operators stay safe on active airfield surfaces in any season.
When should I consider a different model instead of the Runway Light Cleaner?
For general pavement or perimeter-road washing rather than recessed light fixtures, specify the Multihog High Pressure Washer instead.
What is the typical upgrade path from the Runway Light Cleaner?
Replaces manual scrub crews and dedicated specialist runway-light washing trucks for airports that want to fold light cleaning into the same Multihog they already use for sweeping and snow clearance.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the Runway Light Cleaner?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.