Manhole Cutter
Contact us for current availability.
MMC 950 manhole cutter designed for the Multihog MH tractor, used for new road construction and restoration of pre-cast manhole units. Exposes a manhole in 1–3 minutes with no water cooling required.
300 mm (12 in) cutting depth for full manhole exposure
Exposes one manhole in 1–3 minutes, drastically reducing work times
Designed for use on the Multihog MH tractor
No water cooling necessary during operation
Handles contact with gravel or rocks without issue
Hard-wearing design with low cutter-tool replacement cost
Range of interchangeable cutter heads supports other cutting applications
Transports between work sites on the front of the Multihog, saving time and money
Utility contractors, road construction crews, and municipal water/sewer departments that expose manholes for inspection, raise pre-cast units during resurfacing, or set new covers during new road construction. A strong fit for teams currently saw-cutting and hand-excavating around manhole rims.
New road construction where manhole rims must be cut to grade
Restoration and raising of pre-cast manhole units after overlay
Exposing buried manholes for inspection or repair
Storm and sanitary sewer access cutting
Utility chamber and valve-box exposure on municipal streets
Exposing a manhole in 1–3 minutes with a 300 mm (12 in) cutting depth eliminates the hours that saw-cut-and-jackhammer crews typically spend per unit. Because no water cooling is required and the tool shrugs off contact with gravel and rocks, operators avoid the water-truck logistics and blade-damage downtime of diamond saws. Increased work quality through optimum compaction plus low replacement-tool cost means lower whole-life cost versus conventional core-and-break methods.
Replaces walk-behind concrete saws, jackhammer crews, and manual excavation around manhole rims. One Multihog MH operator handles what used to take a full saw-and-breaker team.
Not intended for surface planing or pothole patch repair, use the Patch Planer (MBP 450) for 150 mm depth asphalt milling across wider patch areas.
Manhole Cutter For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the Manhole Cutter best suited for?
Utility contractors, road construction crews, and municipal water/sewer departments that expose manholes for inspection, raise pre-cast units during resurfacing, or set new covers during new road construction. A strong fit for teams currently saw-cutting and hand-excavating around manhole rims.
What are the main applications for the Manhole Cutter?
The Manhole Cutter is ideal for: New road construction where manhole rims must be cut to grade; Restoration and raising of pre-cast manhole units after overlay; Exposing buried manholes for inspection or repair; Storm and sanitary sewer access cutting; Utility chamber and valve-box exposure on municipal streets.
What sets the Manhole Cutter apart from other quick-change attachments?
Exposing a manhole in 1–3 minutes with a 300 mm (12 in) cutting depth eliminates the hours that saw-cut-and-jackhammer crews typically spend per unit. Because no water cooling is required and the tool shrugs off contact with gravel and rocks, operators avoid the water-truck logistics and blade-damage downtime of diamond saws. Increased work quality through optimum compaction plus low replacement-tool cost means lower whole-life cost versus conventional core-and-break methods.
When should I consider a different model instead of the Manhole Cutter?
Not intended for surface planing or pothole patch repair, use the Patch Planer (MBP 450) for 150 mm depth asphalt milling across wider patch areas.
What is the typical upgrade path from the Manhole Cutter?
Replaces walk-behind concrete saws, jackhammer crews, and manual excavation around manhole rims. One Multihog MH operator handles what used to take a full saw-and-breaker team.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the Manhole Cutter?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.