High Tip Bucket
Contact us for current availability.
MHTB 350 front-mounted high tip bucket for moving rubble, debris, and loose materials between sites on the Multihog. 350 L capacity, 1,300 mm bucket width, and a 91° dual-assisted high tipping action designed around one-operator efficiency.
350 L (92 gal / 12.4 ft³) capacity
Bucket width of 1,300 mm (51 in)
91° dual-assisted high tipping action for clearing skip walls and trailers
450 mm (18 in) sideshift function included as standard
Heat-treated cutting edge for wear resistance
2-pack powder-coat process minimises the risk of corrosion
Heavy-duty build, operated from inside the Multihog cabin
Front-mounted with full in-cab control
Facilities managers, demolition cleanup crews, municipal maintenance teams, and landscapers that move rubble, aggregate, compost, and green waste between job sites. Especially fitted to operators loading skips, trailers, and transfer-station chutes that standard loader buckets can't clear over.
Loading debris and rubble into skips and roll-offs over the side wall
Transferring aggregate, sand, and cold patch between stockpile and work face
Compost and green-waste loading at park depots
Site clean-up after demolition, paving, or utility work
Materials shuttle on large campuses and industrial facilities
The 91° dual-assisted high tipping action clears skip and trailer side walls that a standard loader bucket can't, a productivity jump worth the attachment on its own. Add the 450 mm sideshift standard and the 1,300 mm width, and operators load precisely against walls and awkward skip positions without repositioning the machine. A heat-treated cutting edge plus 2-pack powder-coat finish keeps the bucket in service longer than painted-steel alternatives in abrasive rubble and aggregate work.
Replaces compact-wheel-loader rentals and manual skip-loading crews for mid-volume debris and aggregate work. One Multihog operator handles the cleanup that used to need a second loader on site.
Not built for removing tree stumps in forestry or woodland work, reach for the Stump Grinder (MSG 1000) with its 1,250 mm extended cutting arc and 16 heavy-duty teeth.
High Tip Bucket For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the High Tip Bucket best suited for?
Facilities managers, demolition cleanup crews, municipal maintenance teams, and landscapers that move rubble, aggregate, compost, and green waste between job sites. Especially fitted to operators loading skips, trailers, and transfer-station chutes that standard loader buckets can't clear over.
What are the main applications for the High Tip Bucket?
The High Tip Bucket is ideal for: Loading debris and rubble into skips and roll-offs over the side wall; Transferring aggregate, sand, and cold patch between stockpile and work face; Compost and green-waste loading at park depots; Site clean-up after demolition, paving, or utility work; Materials shuttle on large campuses and industrial facilities.
What sets the High Tip Bucket apart from other quick-change attachments?
The 91° dual-assisted high tipping action clears skip and trailer side walls that a standard loader bucket can't, a productivity jump worth the attachment on its own. Add the 450 mm sideshift standard and the 1,300 mm width, and operators load precisely against walls and awkward skip positions without repositioning the machine. A heat-treated cutting edge plus 2-pack powder-coat finish keeps the bucket in service longer than painted-steel alternatives in abrasive rubble and aggregate work.
When should I consider a different model instead of the High Tip Bucket?
Not built for removing tree stumps in forestry or woodland work, reach for the Stump Grinder (MSG 1000) with its 1,250 mm extended cutting arc and 16 heavy-duty teeth.
What is the typical upgrade path from the High Tip Bucket?
Replaces compact-wheel-loader rentals and manual skip-loading crews for mid-volume debris and aggregate work. One Multihog operator handles the cleanup that used to need a second loader on site.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the High Tip Bucket?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.