High Pressure Washer
Contact us for current availability.
The KPL 220/460 is a front-mounted high-pressure washer with a 9-nozzle spray bar and a 20 m hand lance, sized for the Multihog CX, MX, and MH ranges. Built for municipalities, highway maintenance agencies, and facilities management companies.
1,850 mm (6 ft) wide front-mounted spray bar with 9 spray nozzles
220 / 460 bar (3,190 / 6,672 psi) pressure options available
50 L/min spraying capacity
20 m (21 yd) hand lance rated for the full system pressure for inaccessible areas
1,200–1,600 L (317–422 gal) rear-mounted water tank, depending on tractor model
Spray bar swivels hydraulically to work at an angle
Additional spray bars can be added; operator can switch to just 3 nozzles to target a spot at higher pressure
Compatible with Multihog CX, MX, and MH ranges, fully joystick-operated from the cabin
See the High Pressure Washer at work
Municipal highway crews, airport and port operators, and facilities managers that must strip paint, oil, and grime from large pavement runs. Strong choice where operators need both a wide sweep-bar pass and a long hand-lance reach from the same tractor.
Road-surface sanitation and emergency spill cleanup
Highway kerb and sign wash-down
Car-park, petrol-station, and depot pressure cleaning
Hard-to-reach wall and furniture cleaning via the 20 m hand lance
Municipal pavement deep-cleaning before line marking
Offers 220 / 460 bar pressure options (up to 6,672 psi), far higher than conventional municipal washers, while still delivering a 1.85 m wide 9-nozzle bar for productivity on open surfaces. Operators can swap from the wide bar to just 3 nozzles on the fly to concentrate pressure on a single stain. A 20 m 500 bar hand lance extends the working radius well beyond the tractor, and rear tank capacities of 1,200–1,600 L keep water on board for long runs. Joystick control keeps the operator warm and dry.
Replaces trailer-mounted pressure washers and petrol-engine pressure units for highway and municipal crews that want a factory-integrated Multihog attachment.
For weed control rather than cleaning, pair with the Multihog Thermal Weed Control or Weed Brush instead of running herbicide through this washer.
High Pressure Washer For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the High Pressure Washer best suited for?
Municipal highway crews, airport and port operators, and facilities managers that must strip paint, oil, and grime from large pavement runs. Strong choice where operators need both a wide sweep-bar pass and a long hand-lance reach from the same tractor.
What are the main applications for the High Pressure Washer?
The High Pressure Washer is ideal for: Road-surface sanitation and emergency spill cleanup; Highway kerb and sign wash-down; Car-park, petrol-station, and depot pressure cleaning; Hard-to-reach wall and furniture cleaning via the 20 m hand lance; Municipal pavement deep-cleaning before line marking.
What sets the High Pressure Washer apart from other quick-change attachments?
Offers 220 / 460 bar pressure options (up to 6,672 psi), far higher than conventional municipal washers, while still delivering a 1.85 m wide 9-nozzle bar for productivity on open surfaces. Operators can swap from the wide bar to just 3 nozzles on the fly to concentrate pressure on a single stain. A 20 m 500 bar hand lance extends the working radius well beyond the tractor, and rear tank capacities of 1,200–1,600 L keep water on board for long runs. Joystick control keeps the operator warm and dry.
When should I consider a different model instead of the High Pressure Washer?
For weed control rather than cleaning, pair with the Multihog Thermal Weed Control or Weed Brush instead of running herbicide through this washer.
What is the typical upgrade path from the High Pressure Washer?
Replaces trailer-mounted pressure washers and petrol-engine pressure units for highway and municipal crews that want a factory-integrated Multihog attachment.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the High Pressure Washer?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.