Flail Mower
Contact us for current availability.
Muething MMU-H heavy-duty flail mulcher designed for the Multihog CX tractor range, with mechanical side shift and reinforced M-style hammer flails to knock down rough grass, brush, and roadside growth. Mounts via three-point linkage and runs off joystick control from inside the cab.
2 m (6.6 ft) working width, with a range of other widths available to match the job and the tractor model
40–56 cm (15.7–22 in) mechanical side shift, depending on model, for offsetting around obstacles
Reinforced M hammer flail heads manufactured from special steel for heavy-duty mulching
Patented shark-fin close-cutting system for a clean finish even on uneven ground
V-belt protection with control opening, plus good ground clearance and a rear support roller for cutting-height adjustment
Three-point linkage mount on the CX tractor with joystick control from inside the heated Multihog cabin
See the Flail Mower at work
Municipal road crews, highway contractors, and facilities teams that need a heavy-duty mulcher for tall grass, weeds, and light brush along verges and embankments. Best suited to operators who already run a Multihog CX and want a rear-mounted flail that can side-shift around guardrails and posts without moving the tractor.
Roadside verge mowing and seasonal right-of-way clearance
Embankment and drainage-ditch mulching
Rough-grass maintenance on industrial estates and rural roads
Mulching light brush and regrowth on unpaved access tracks
Amenity field cutdowns where grass has been allowed to grow long
The reinforced M hammer flails are made from special steel to survive the mix of grass, woody regrowth, and hidden debris typical of roadside verges, while the patented shark-fin close-cutting system delivers a finish cleaner than most rough-duty flails. Up to 56 cm of mechanical side shift lets the operator dodge posts and barriers without repositioning the tractor. The support roller and adjustable ground clearance dial the cut in precisely, and V-belt protection with a control opening keeps maintenance quick.
Displaces a separate tractor-plus-flail combination or contract mowing services for routine verge and embankment work, consolidating rough-cut mulching onto the same Multihog that handles year-round duties.
Not for fine sports-turf or parkland finish work; step up to the Multihog Cylinder Mower MCM 3/5/7 or Front Mower with Collection when presentation-grade cut quality is the priority.
Flail Mower For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the Flail Mower best suited for?
Municipal road crews, highway contractors, and facilities teams that need a heavy-duty mulcher for tall grass, weeds, and light brush along verges and embankments. Best suited to operators who already run a Multihog CX and want a rear-mounted flail that can side-shift around guardrails and posts without moving the tractor.
What are the main applications for the Flail Mower?
The Flail Mower is ideal for: Roadside verge mowing and seasonal right-of-way clearance; Embankment and drainage-ditch mulching; Rough-grass maintenance on industrial estates and rural roads; Mulching light brush and regrowth on unpaved access tracks; Amenity field cutdowns where grass has been allowed to grow long.
What sets the Flail Mower apart from other quick-change attachments?
The reinforced M hammer flails are made from special steel to survive the mix of grass, woody regrowth, and hidden debris typical of roadside verges, while the patented shark-fin close-cutting system delivers a finish cleaner than most rough-duty flails. Up to 56 cm of mechanical side shift lets the operator dodge posts and barriers without repositioning the tractor. The support roller and adjustable ground clearance dial the cut in precisely, and V-belt protection with a control opening keeps maintenance quick.
When should I consider a different model instead of the Flail Mower?
Not for fine sports-turf or parkland finish work; step up to the Multihog Cylinder Mower MCM 3/5/7 or Front Mower with Collection when presentation-grade cut quality is the priority.
What is the typical upgrade path from the Flail Mower?
Displaces a separate tractor-plus-flail combination or contract mowing services for routine verge and embankment work, consolidating rough-cut mulching onto the same Multihog that handles year-round duties.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the Flail Mower?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.