Drop Sander
Contact us for current availability. Order before fall for winter readiness.
Drop Sander and dump body combination engineered for the Multihog CX tractor. The companion dump body extends working range between aggregate refills while the sander places grit precisely on sidewalks and lot edges.
Sander capacity up to 1/3 yd³ (252 L) with hydraulically driven operation and adjustable material flow rates
Wear-resistant dump body with 1/2 yd³ (382 L) capacity to extend run time between refills
Signal lights fitted on the sander box for safe work in traffic and low light
Built specifically for Multihog CX tractor as a matched drop-sander plus dump body system
See the Drop Sander at work
Municipalities, cities, towns, and institutions running the Multihog CX that sand sidewalks, crosswalks, and parking-area edges on defined routes. Best for crews who need one compact tractor that can drop grit and carry a full second hopper of aggregate at the same time.
Sanding downtown sidewalks and pedestrian crossings
Treating bus stops, transit platforms, and ADA ramps
Gritting parking area walkways and stair approaches
Campus, hospital, and school path gritting routes
Extended sanding runs where refill stops would kill productivity
A 1/3 yd³ sander plus a 1/2 yd³ onboard dump body is the real value, a full shift of aggregate on the tractor without trips back to the yard. Hydraulic drive with adjustable flow rates replaces spinner sanders that over-apply on every pass, and the signal lights on the box keep the operator legal in traffic and twilight. The whole system is purpose-matched to the Multihog CX, not a generic 3-point hopper bolted onto a utility vehicle.
Replaces pickup-mounted tailgate sanders and hand-push walk-behind spreaders on institutional sidewalk routes.
Not a substitute for bulk road salt work, the Salt Spreader handles variable spread widths and wet salt pre-wetting for street routes.
Drop Sander For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the Drop Sander best suited for?
Municipalities, cities, towns, and institutions running the Multihog CX that sand sidewalks, crosswalks, and parking-area edges on defined routes. Best for crews who need one compact tractor that can drop grit and carry a full second hopper of aggregate at the same time.
What are the main applications for the Drop Sander?
The Drop Sander is ideal for: Sanding downtown sidewalks and pedestrian crossings; Treating bus stops, transit platforms, and ADA ramps; Gritting parking area walkways and stair approaches; Campus, hospital, and school path gritting routes; Extended sanding runs where refill stops would kill productivity.
What sets the Drop Sander apart from other quick-change attachments?
A 1/3 yd³ sander plus a 1/2 yd³ onboard dump body is the real value, a full shift of aggregate on the tractor without trips back to the yard. Hydraulic drive with adjustable flow rates replaces spinner sanders that over-apply on every pass, and the signal lights on the box keep the operator legal in traffic and twilight. The whole system is purpose-matched to the Multihog CX, not a generic 3-point hopper bolted onto a utility vehicle.
When should I consider a different model instead of the Drop Sander?
Not a substitute for bulk road salt work, the Salt Spreader handles variable spread widths and wet salt pre-wetting for street routes.
What is the typical upgrade path from the Drop Sander?
Replaces pickup-mounted tailgate sanders and hand-push walk-behind spreaders on institutional sidewalk routes.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the Drop Sander?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.