Multihog CL
Contact us for current availability and factory lead times.
75 HP Hatz-powered compact multi-purpose tractor with 3,500–4,000 kg GVW, positioned as the entry point into the Multihog tractor line for year-round municipal maintenance.
75 HP Hatz diesel engine, Stage V / Tier 4 Final emissions
3,500–4,000 kg (7,716–8,818 lb) GVW with 2,000–2,500 kg (4,409–5,511 lb) unladen weight
4,100 mm (161 in) length, 1,200–1,600 mm (47–63 in) adjustable width, 1,995 mm (79 in) height
2,550–2,740 mm (100–108 in) outer turning radius for tight sidewalks and courtyards
Front axle capacity 2,200 kg (4,850 lb), rear axle capacity 2,500 kg (5,511 lb), tire-dependent
200 L (53 gal) water tank with heavy-duty cooling engineered for hot-climate operation
Maximum travel speed 40 km/h (25 mph) with full independent spring-and-damper suspension
See the Multihog CL at work
Budget-constrained municipalities, parks departments, facility managers, and contractors who need a road-legal compact tractor to cover sidewalk sweeping, mowing, snow clearing, and light power-washing from one chassis. A strong fit for first-time Multihog buyers replacing a mixed fleet of single-purpose compact machines without stepping up to the price point of the CX MK II.
Sidewalk and bike-path sweeping with front brush attachments
Winter snow plowing and salt/brine spreading on city streets and parking lots
Parks and greenway mowing with front-mounted deck or flail attachments
Weed control, line removal, and surface cleaning around municipal facilities
De-icing spraying and gully cleaning for public-works crews
Light hauling with rear-mounted tipping body or attachment carrier
The CL delivers the same 3,500–4,000 kg GVW, 75 HP powerplant, and Stage V / Tier 4 Final emissions as larger Multihog compacts, but at the entry level of the tractor line, giving smaller towns and contractors access to the 40+ attachment ecosystem without the larger cabin, heavier axles, or taller stance of the CX MK II. Fully independent suspension on every wheel and a 200 L water tank match higher-tier models for operator comfort and dust suppression. Tier 4 Final compliance keeps it eligible for federal and state fleet procurement programs other compact tractors fail.
Replaces aging compact tractors and single-purpose utility vehicles (dedicated sweepers, stand-alone snow machines, and undersized mowers) that sit idle most of the year while burning insurance, storage, and maintenance budget.
Agencies running heavier attachments (wide flail mowers, large snow blowers, asphalt planers) or needing higher hydraulic flow should step up to the CX MK II with its 100 L/min flow and 220 bar operating pressure, or the 130 HP MXC/MX heavy-duty tractors.
Multihog CL For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the Multihog CL best suited for?
Budget-constrained municipalities, parks departments, facility managers, and contractors who need a road-legal compact tractor to cover sidewalk sweeping, mowing, snow clearing, and light power-washing from one chassis. A strong fit for first-time Multihog buyers replacing a mixed fleet of single-purpose compact machines without stepping up to the price point of the CX MK II.
What are the main applications for the Multihog CL?
The Multihog CL is ideal for: Sidewalk and bike-path sweeping with front brush attachments; Winter snow plowing and salt/brine spreading on city streets and parking lots; Parks and greenway mowing with front-mounted deck or flail attachments; Weed control, line removal, and surface cleaning around municipal facilities; De-icing spraying and gully cleaning for public-works crews; Light hauling with rear-mounted tipping body or attachment carrier.
What sets the Multihog CL apart from other compact range?
The CL delivers the same 3,500–4,000 kg GVW, 75 HP powerplant, and Stage V / Tier 4 Final emissions as larger Multihog compacts, but at the entry level of the tractor line, giving smaller towns and contractors access to the 40+ attachment ecosystem without the larger cabin, heavier axles, or taller stance of the CX MK II. Fully independent suspension on every wheel and a 200 L water tank match higher-tier models for operator comfort and dust suppression. Tier 4 Final compliance keeps it eligible for federal and state fleet procurement programs other compact tractors fail.
When should I consider a different model instead of the Multihog CL?
Agencies running heavier attachments (wide flail mowers, large snow blowers, asphalt planers) or needing higher hydraulic flow should step up to the CX MK II with its 100 L/min flow and 220 bar operating pressure, or the 130 HP MXC/MX heavy-duty tractors.
What is the typical upgrade path from the Multihog CL?
Replaces aging compact tractors and single-purpose utility vehicles (dedicated sweepers, stand-alone snow machines, and undersized mowers) that sit idle most of the year while burning insurance, storage, and maintenance budget.
Related Multihog Products
Interested in the Multihog CL?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.