City Cleaner
Contact us for current availability.
The CityCleaner is an all-in-one hot-water and high-pressure cleaning attachment for thermal weed control, road surface cleaning, gum and graffiti removal, and sewer jetting. It uses no chemical cleaning agents or pesticides.
120 cm (47 in) spray beam delivers 100 °C (212 °F) hot-water weed control over up to 2,500 m² (27,000 ft²) per hour
200 bar steam at 150 °C (300 °F) removes up to 1,800 pieces of chewing gum per hour, 4–6× faster than other methods
Graffiti removal capacity of up to 20 m² (215 ft²) per hour via steam function, no chemicals required
High-pressure washing up to 4,000 m² (4,784 yd²) per hour at 200 bar for emergency road cleaning
Steam bactericidal cleaning of refuse bins at up to 200 m² (2,152 ft²) per hour
Sewer-cleaning capability for drains up to 200 mm (7.8 in) in diameter
Available in MCC H600/H800/H1100 configurations to suit tank size
See the City Cleaner at work
City and town councils, BID operators, and facilities management companies that manage a mix of pavements, street furniture, refuse areas, and sewer drains. A strong fit for operators prioritising eco-friendly, chemical-free maintenance across multiple surfaces.
Thermal weed control on pavements and kerbs
Chewing-gum removal on high-footfall city streets
Graffiti removal from monuments, facades, and street furniture
Refuse-bin sanitation to neutralise foul odours
Sewer-drain cleaning up to 200 mm diameter
Emergency road-surface cleaning after spills
Replaces four separate pieces of municipal equipment, a hot-water weed killer, a gum-removal rig, a graffiti steam washer, and a pressure-jet road cleaner, in a single Multihog quick-change attachment. Operating at 200 bar and 150 °C, the CityCleaner pulverises gum 4–6× faster than conventional methods with no residue. Because every function runs on water and steam, the unit eliminates chemical storage, pesticide compliance paperwork, and run-off concerns. Multiple tank configurations (H600/H800/H1100) let buyers right-size the rig for their route.
Replaces standalone hot-water weed killers, gum-removal trolleys, graffiti-steam rigs, and truck-mounted pressure washers for councils seeking one multi-function Multihog attachment.
If you need bulk debris vacuum collection instead of washing and steam, pair or substitute with the Multihog High Volume Sweeper or Front Sweeper.
City Cleaner For Sale
2026 MULTIHOG CV350 Compact Vacuum Sweeper
8,000 m³/h suction clears fine dust and debris without frequent tank stops • Four independent cooling circuits protect fuel, air, water, and hydraulic oil in demanding conditions
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Suction power of 4,700 CFM handles fine dust and debris in a 47 to 93 inch sweeping width • 50% gradeability unladen lets you work steep urban streets without losing traction
2026 MULTIHOG CX75 Multipurpose Tractor
100 GPM load-sensing hydraulic system runs mowers, blowers, and plows on a single tractor • 75 HP Deutz engine with no AdBlue fluid required
2026 MULTIHOG CV350 Compact Vacuum Sweeper
4,700 cfm (8,000 m³/h) suction handles wet debris and fine dust in a single pass • Adjustable brush width from 47 to 93 inches fits narrow urban streets and wide arterials
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Only 5 hours of engine time on a 2026 unit, nearly new mechanical condition • Stage V emissions and HVO biofuel ready for fleet standardization and fuel flexibility
2026 MULTIHOG CV350 Compact Vacuum Sweeper
Fine-particle dust control with 200 L water recirculation tank and four independent cooling sections for fuel, air, water, and hydraulic oil • Steep-street traction: 50% gradeability unladen on hydrostatic drivetrain, built for urban grades
2024 MULTIHOG CX75 Multipurpose Tractor
126 engine hours and 679 miles: nearly new demo unit ready for work • 75 HP Deutz engine meets Stage V and Tier 4 Final emissions with zero AdBlue requirement
2023 MULTIHOG CX75 Multipurpose Tractor
75 HP Deutz engine with 26.4 GPM hydraulic flow and dual PTO for simultaneous front and rear attachments • Only 87 engine hours and 106 miles, early in its service life
Frequently Asked Questions
Who is the City Cleaner best suited for?
City and town councils, BID operators, and facilities management companies that manage a mix of pavements, street furniture, refuse areas, and sewer drains. A strong fit for operators prioritising eco-friendly, chemical-free maintenance across multiple surfaces.
What are the main applications for the City Cleaner?
The City Cleaner is ideal for: Thermal weed control on pavements and kerbs; Chewing-gum removal on high-footfall city streets; Graffiti removal from monuments, facades, and street furniture; Refuse-bin sanitation to neutralise foul odours; Sewer-drain cleaning up to 200 mm diameter; Emergency road-surface cleaning after spills.
What sets the City Cleaner apart from other quick-change attachments?
Replaces four separate pieces of municipal equipment, a hot-water weed killer, a gum-removal rig, a graffiti steam washer, and a pressure-jet road cleaner, in a single Multihog quick-change attachment. Operating at 200 bar and 150 °C, the CityCleaner pulverises gum 4–6× faster than conventional methods with no residue. Because every function runs on water and steam, the unit eliminates chemical storage, pesticide compliance paperwork, and run-off concerns. Multiple tank configurations (H600/H800/H1100) let buyers right-size the rig for their route.
When should I consider a different model instead of the City Cleaner?
If you need bulk debris vacuum collection instead of washing and steam, pair or substitute with the Multihog High Volume Sweeper or Front Sweeper.
What is the typical upgrade path from the City Cleaner?
Replaces standalone hot-water weed killers, gum-removal trolleys, graffiti-steam rigs, and truck-mounted pressure washers for councils seeking one multi-function Multihog attachment.
Related Multihog Products
Snow Plough
Heavy-duty front-mounted snow plough (MSP) built from high-grade steel with a closed-profile ladder frame for maximum stability. Fully hydraulic lift, tilt, and 30° angle pivot controlled from inside the Multihog cab.
V Snow Plough
Front-mounted V-configuration snow plough for Multihog MH and MX tractors, designed to split drifted snow and hard-packed banks. The V profile opens a center cut and pushes material outward to both sides in one pass.
Box Snow Plough
Front-mounted Box Plough (MBSP 2440) with heavy-duty 180° hydraulic side wings that contain snow as it is moved rather than letting it spill around the blade. Designed for large open sites on Multihog MH and MX tractors.
Interested in the City Cleaner?
Our Multihog specialists can answer your questions, provide pricing, or schedule a hands-on demo.