City Jet
Contact us for current availability and factory lead times.
Pure vacuum street sweeper body built around a 100% stainless steel 8.5 cubic yard hopper, 502-gallon water tank, and DEUTZ 3.6L 136 HP Turbo Diesel auxiliary engine. Body-only solution that mounts on a standard truck chassis, sweeps both sides simultaneously, and handles heavy debris like rocks and sand alongside leaves and light material.
100% stainless steel 8.5 cubic yard hopper with 60° dump angle and pneumatic shaker screen
Pure vacuum sweeping handles heavy debris (rocks, sand) along with leaves and light material
Dual 28-inch gutter brooms with simultaneous left- and right-side sweep, in-cab speed and pressure controls
59 x 15.75-inch main broom that pivots 20° either side with in-cab adjustments
29.5-inch suction nozzle with replaceable liner, heavy-duty 10-inch diameter suction hose
DEUTZ 3.6L 136 HP Turbo Diesel auxiliary engine with high-performance hydraulic system
502-gallon polyethylene water tank for full-shift sweeping without refill
On-board PM10 dust suppression: 10 GPM at 58 PSI with independent flow control valves
8-inch top-mounted catch-basin hose with 300° reach (rear-mounted option available)
High-pressure wash-down system at 4 GPM and 1450 PSI, optional 8-gallon package with 50-foot reel and lance
Centralized pneumatic and hydraulic locker for eye-level diagnostics, automatic safety prop, dual-hand tailgate controls
Rear-view camera with 7-inch LCD monitor, dual LED hopper beacons, right- and left-hand steering
Municipalities that want a high-performance vacuum sweeper on a chassis they choose. The City Jet is a body-only solution: you provide the truck, FAUN provides the sweeping system, which cuts cost versus buying a purpose-built chassis-and-body unit. A practical fit for downtown cleaning on narrow streets where a full-size V6Air won’t fit.
Downtown and historic-district sweeping on narrow streets
Catch basin cleaning with the top-mounted 8-inch hose
Routine municipal maintenance routes where dual gutter brooms speed coverage
Tourist zones, pedestrian malls, and cobblestone streets that need a smaller footprint
Fleets that prefer to standardize on a single truck chassis brand
Built body (body-only) means you mount the sweeping system on the chassis your fleet already runs, no need to buy a purpose-built sweeper truck. The 8.5 yd³ stainless hopper, 502-gallon water tank, and DEUTZ 3.6L 136 HP auxiliary engine pair pure-vacuum sweeping performance with serviceable, widely-supported components. Centralized pneumatic and hydraulic manifolds live in one enclosed locker, so diagnostics happen at eye level instead of under the body.
Smaller cities that have stretched light-duty parking lot sweepers into municipal street work and watched them fail, or fleets carrying full-size V-body sweepers that overshoot the routes they were bought for.
For heavy industrial debris, construction cleanup, or full catch-basin work, the V6Air delivers higher suction force and includes a rear wander hose. For zero-emission mandates, the M4EV or M3EV offers plug-in electric operation; the City Jet still uses a diesel auxiliary engine.
City Jet For Sale
2026 Global Environmental Products M4 Mechanical Sweeper
Clear a full traffic lane in one pass with a 2,300 mm (90 in) working width • Run longer between dumps with a 355 L (12.5 ft³) dirt collection hopper
2026 Global Environmental Products M3 Mechanical Three-Wheel Sweeper
Get a 2026 three-wheel mechanical sweeper with only 12 miles and 3 chassis hours on the clock • Run tight curb lines and cul-de-sacs with a three-wheel chassis built for maneuverability
2024 Global Environmental Products M4HSD Mechanical Sweeper
Clear full traffic lane in one pass with 2,300 mm working width and dual brushes • Low downtime between loads: 1.1 m³ hopper and 355 L dirt collection capacity handle extended runs
2020 Global Environmental Products R3 Regenerative Air Sweeper
Long route runtime from a 5.8 cubic yard stainless steel hopper and 230 gallon water tank • Tight-yard maneuverability with a 12.5 foot turning radius and high-dump hopper
2018 Global Environmental Products R3 Regenerative Air Sweeper
Cover a full traffic lane in one pass with a 2,000 mm sweeping width, expandable to 2,500 mm • Keep dust down with a low-pressure water spray system feeding the 280 L fresh water tank
2016 Global Environmental Products M3 Mechanical Sweeper (Used)
Move more debris per shift with a high-dump hopper that unloads directly into a tandem • Keep operators productive on long routes with a factory A/C cab
2016 Global Environmental Products V6 Vacuum Sweeper
Capture fine dust and wet debris with a true pure-vacuum system, not a broom-and-conveyor design • Sweep curb lines from either side using dual steering and dual gutter brooms with simultaneous operation
2013 Global Environmental Products M3 Mechanical Sweeper (Used)
Pick up coarse debris mechanical brooms handle better than air sweepers: gravel, millings, sand, wet leaves • Inspect and drive the unit in Fort Wayne, IN before you commit
2017 Global Environmental Products R3 Regenerative Air Sweeper
Capture fine particulate that mechanical brooms miss, helping with fine particulate that programs like MS4 ask sweepers to capture • Get balanced wear with 744 chassis hours and 727 auxiliary engine hours, the aux number being the true wear indicator on the sweeping system
Frequently Asked Questions
Who is the City Jet best suited for?
Municipalities that want a high-performance vacuum sweeper on a chassis they choose. The City Jet is a body-only solution: you provide the truck, FAUN provides the sweeping system, which cuts cost versus buying a purpose-built chassis-and-body unit. A practical fit for downtown cleaning on narrow streets where a full-size V6Air won’t fit.
What are the main applications for the City Jet?
The City Jet is ideal for: Downtown and historic-district sweeping on narrow streets; Catch basin cleaning with the top-mounted 8-inch hose; Routine municipal maintenance routes where dual gutter brooms speed coverage; Tourist zones, pedestrian malls, and cobblestone streets that need a smaller footprint; Fleets that prefer to standardize on a single truck chassis brand.
What sets the City Jet apart from other vacuum air street sweepers?
Built body (body-only) means you mount the sweeping system on the chassis your fleet already runs, no need to buy a purpose-built sweeper truck. The 8.5 yd³ stainless hopper, 502-gallon water tank, and DEUTZ 3.6L 136 HP auxiliary engine pair pure-vacuum sweeping performance with serviceable, widely-supported components. Centralized pneumatic and hydraulic manifolds live in one enclosed locker, so diagnostics happen at eye level instead of under the body.
When should I consider a different model instead of the City Jet?
For heavy industrial debris, construction cleanup, or full catch-basin work, the V6Air delivers higher suction force and includes a rear wander hose. For zero-emission mandates, the M4EV or M3EV offers plug-in electric operation; the City Jet still uses a diesel auxiliary engine.
What is the typical upgrade path from the City Jet?
Smaller cities that have stretched light-duty parking lot sweepers into municipal street work and watched them fail, or fleets carrying full-size V-body sweepers that overshoot the routes they were bought for.
Related Global Environmental Products
Interested in the City Jet?
Our Global Environmental specialists can answer your questions, provide pricing, or schedule a hands-on demo.